Rimix™ 3D
Built for Large-Scale Industrial Slabs
Advanced Fiber Systems for Industrial Flooring
Since 2002, we have specialized in concrete crack resistance, waterproofing, and anti-corrosion technologies.
For slabs-on-grade, residential slabs, commercial and warehouse floors, industrial and heavy-duty slabs, parking decks, composite metal decks, overlays, pavements, and shotcrete.
Rimix™ 3D replaces welded wire reinforcement (WWR) and steel fiber reinforcement with a dense distributed 3D reinforcement network, reducing labor, accelerating construction, and improving crack control and structural performance.
What is Rimix™ 3D?
Rimix™ 3D is a Structural Reinforcement System for concrete slabs.
By distributing high-performance macro synthetic fibers throughout the concrete, the system forms a dense distributed 3D reinforcement network that enhances structural performance and long-term durability.
.jpg)
Why Move Beyond Traditional Reinforcement?
Traditional reinforcement systems such as welded wire reinforcement (WWR) and steel fibers are widely used in concrete slabs, but each system presents structural and construction limitations.
Welded Wire Reinforcement (WWR)
WWR has long been used to provide temperature and shrinkage reinforcement in concrete slabs. However, it reinforces only a single two-dimensional plane, limiting its ability to control cracking throughout the concrete volume.
Its effectiveness also depends heavily on proper placement. Mesh may shift or settle during pouring, and installation requires tying and supports, increasing labor, construction time, and potential corrosion risks.
Steel Fiber Reinforcement
Steel fibers provide good strengthening and toughening effects, improving post-crack load capacity and impact resistance. However, due to the limited number of fibers per unit volume, crack control performance is relatively limited.
Steel fibers may also introduce practical limitations during construction and service, including limited dispersion during mixing, reduced pumpability, challenges in achieving smooth floor finishes, potential corrosion risks, and higher overall material costs due to typically higher dosage.
.jpg)
How Rimix™ 3D Reinforces Concrete Floors
Rimix™ 3D is a Structural Reinforcement System for concrete floors that distributes high-performance macro synthetic fibers throughout the mix, creating millions of distributed secondary reinforcements that can replace welded wire reinforcement (WWR) used for crack control.
At the same dosage volume, Rimix™ 3D provides 5–10 times more fibers than steel fibers, forming a dense distributed 3D reinforcement network that intercepts and controls cracks more effectively throughout the slab.
Engineered specifically for floor applications, Rimix™ 3D improves bond strength, pull-out resistance, and finishability, while its high tensile strength enhances post-crack residual strength, flexural toughness, and impact resistance, reducing cracking and extending floor service life.
Why Rimix™ 3D Is Better for Concrete Floors
Rimix™ 3D is engineered for concrete floor applications, replacing welded wire reinforcement (WWR) and steel fiber systems with a dense distributed 3D reinforcement network that improves crack control in slabs-on-grade.
More Fibers. Better Crack Control
Rimix™ 3D provides 5–10× more fibers than steel fibers, forming a dense reinforcement network that improves crack control and maintains post-crack strength.
Smooth Finish. Better Floor Quality
Rimix™ 3D remains subsurface and does not interfere with power-troweled finishing, producing smooth and dense concrete floors.
No Balling. No Wear. No Rust
Rimix™ 3D disperses uniformly without fiber balling, pumps easily without blocking, and does not cause equipment wear. Unlike steel reinforcement, it also eliminates corrosion risks.
No Mesh. No Tying. No Chairs.
Rimix™ 3D eliminates welded wire mesh installation, tying, and support chairs, simplifying slab construction.
Lower Cost. Faster Construction
Simplified installation reduces labor, accelerates construction schedules, and lowers total project costs.
.jpg)
Rimix™ 3D Selection Guide
Rimix™ 3D Structural Reinforcement System is available in three performance levels designed for different concrete floor applications.
The macro synyhetic fibers are manufactured and tested in accordance with ASTM C1116/C1116M, ASTM D7508, and EN 14889-2 standards.
Model
Typical Application
Typical Dosage
Rimix™ 3D100
Light-duty slabs and pavements
3-12lb/yd³ (1.8–7.1 kg/m³)
Rimix™ 3D200
Commercial and industrial floors
3-12lb/yd³ (1.8–7.1 kg/m³)
Rimix™ 3D300
Heavy-duty floors and infrastructure
3-7.5lb/yd³ (1.8–4.5kg/m³)
Optimize your next concrete floor with Rimix™ 3D.
From light commercial slabs to heavy-duty industrial pavements, Rimix™ 3D delivers the right level of reinforcement, crack control, and construction efficiency for every project.
Need Help Selecting the Right Floor Reinforcement?
Our engineers will review your project and recommend the most suitable Rimix™ 3D fiber solution within 24 hours.
What Type of Concrete Floor Are You Building?
-
Commercial Floor Slabs
-
Warehouse / Logistics Floors
-
Industrial Floors
-
Heavy-Duty Pavements
-
Composite Metal Deck Slabs
-
Shotcrete Applications
Privacy Assurance: We respect your privacy and will never share your information.
Why Choose Us?
Proven Expertise & Greater Savings
22 years of focus
on concrete protection solutions.
20+ patents & awards
In concrete durability technology
20+ countries served
with global product distribution.
1,000 projects proven
in diverse applications worldwide.
FAQ
Rimix™ 3D is an advanced structural reinforcement solution for concrete floors, utilizing high-performance macro synthetic fibers to create a dense, distributed 3D reinforcement network throughout the concrete slab. This system improves crack control, structural performance, and long-term durability while eliminating the need for traditional welded wire reinforcement (WWR) and steel fiber reinforcement.
Traditional WWR can be ineffective in controlling cracks across the full thickness of concrete slabs. Rimix™ 3D replaces WWR with a distributed network of fibers that enhance crack control, improve post-crack strength, and reduce construction time by eliminating the need for mesh, tying, and chairs. It’s more cost-effective and efficient for large-scale projects.
Rimix™ 3D provides 5–10 times more fibers than steel fiber reinforcement, forming a continuous 3D reinforcement system that:
-
Improves crack initiation and propagation control
-
Enhances flexural toughness, impact resistance, and post-crack load-bearing capacity
-
Ensures a smooth finish for concrete floors without interfering with power-trowel finishing
-
Eliminates corrosion risks that steel fibers or mesh might introduce
-
Rimix™ 3D is suitable for a wide range of applications, including:
-
Light-duty slabs and pavements
-
Commercial and industrial floors
-
Heavy-duty slabs and pavements
-
Composite metal deck slabs
-
Shotcrete applications
The system adapts to various load requirements, offering specific performance levels for different types of concrete floors.
-
In industrial floor projects, Rimix™ 3D:
-
Eliminates the need for mesh, tying, and chairs, simplifying the reinforcement process
-
Reduces labor intensity and speeds up construction timelines
-
Offers enhanced crack control and impact resistance for heavy-duty industrial floors
-
Ensures long-term durability with no risk of corrosion
-
Contact Us
For product inquiries, OEM/ODM partnerships, or becoming a distributor: Sales@pioneerfibre.com
For technical support and application guidance: Support@pioneerfibre.com
Regional WhatsApp Support
We typically respond within 24 hours, ensuring your project continues without delays.
-
Americas: +1 (702) 307-8327
-
Europe: +86 151 6240 5106
-
Middle East & Africa：+1 (949) 317-7180
-
Asia-Pacific：+86 190 1543 5408
