top of page
pioneerfibre-logo

Since 2002

Brush-On / Spray-Applied Crystalline Concrete Sealer
CrystalGuard™ 300 concrete penetrating waterproofing sealer providing durable waterproofing for hydropower facilities and preventing water leakage in concrete structures.

CrystalGuard 300

Crystalline Penetrating Waterproofing Sealer

Deep Protection. Integral Durability

Since 2002, we have specialized in concrete crack resistance, waterproofing, and anti-corrosion technologies.

PIONEER CrystalGuard 300

Deep Penetrating Crystalline Waterproofing Sealer

CrystalGuard 300 Spray-Applied Crystalline Sealer

PIONEER CrystalGuard 300 is a spray-applied crystalline waterproofing treatment for concrete surfaces. It is designed to promote crystalline formation within concrete pores and capillaries to help reduce water penetration. Apply using suitable manual or automated spray equipment in accordance with the current Technical Data Sheet. Performance depends on substrate preparation, application rate, curing, and exposure conditions.

Crystalline waterproofing products crystalguard 300 pails

Key Benefits of CrystalGuard 300 Spray Crystalline Sealer

  • Easy to Apply: Manual or automatic spray application for flexibility and ease of use.

  • Efficient Coverage: Coverage of 0.5kg per square meter, applied in two coats (0.3kg for the first and 0.2kg for the second).

  • Crack-Sealing Support: Designed to promote crystalline growth within fine cracks and capillary pathways under suitable moisture conditions, helping reduce water ingress over time.

  • Penetrating Crystalline Action: Designed to penetrate into the concrete pore structure and promote crystalline formation within capillary pathways, helping reduce water ingress below the treated surface.

  • Cost Planning: Evaluate material and application costs based on the recommended coverage rate and project conditions.

CrystalGuard Integral Crystalline Waterproofing Technology

CrystalGuard Integral Waterproofing is the result of PIONEER’s 24 years of technological innovation, using crystalline waterproofing technology to achieve self-healing of concrete cracks and inherent waterproofing of concrete structures. This technology redefines the concept of building waterproofing and brings an intelligent dimension to concrete.

The related technologies of CrystalGuard have earned over 20 patents and received national recognition, including the Second Prize of the National Science and Technology Progress Award and the First Prize of the Ministry of Education Science and Technology Progress Award. CrystalGuard overcomes the limitations of traditional flexible waterproof materials, such as aging, blistering, difficulty in construction, and challenging maintenance. Long-term waterproofing performance depends on the concrete design, workmanship, curing, crack characteristics and exposure conditions. Assess suitability using current product-specific test reports and project requirements.

Display of Chinese patent certificates and a National Science and Technology Progress Award certificate with PIONEER branding.

Technical Advantages of Spray-Applied Crystalline Sealer

  • Water Absorption Resistance: CrystalGuard 300 is designed to reduce capillary water absorption by promoting crystalline formation within the concrete pore structure. Actual performance depends on concrete composition, substrate condition, application rate, curing and exposure conditions.

  • Efficient Application Rate: Typical total application rate is approximately 0.5 kg/m² in two coats, subject to substrate condition and project requirements.

  • Crack-Sealing Support: The crystalline reaction can continue in the presence of moisture and may help seal fine cracks and capillary pathways in the concrete.

  • Durability: The crystalline reaction is designed to provide long-term protection within the concrete pore structure, subject to substrate condition, application quality and service exposure.

Worker spraying CrystalGuard™ 300 crystalline waterproofing on concrete slab for integral waterproofing and concrete protection

Spray and Seal
Effortless Waterproofing

Relevant Test Methods

ASTM C1585 — Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

ASTM C1585 may be used to evaluate the effect of CrystalGuard™ 300 on the rate of water absorption of treated concrete compared with untreated concrete.

Typical Applications for Spray Crystalline Sealer

  • Water Tanks: Helps reduce water ingress and leakage through treated concrete surfaces. Suitability for potable-water applications should be confirmed according to project and regulatory requirements.

  • Underground Structures: Suitable for basements, foundations and other below-grade concrete where reduced water ingress is required.

  • Bridge Decks: Helps reduce surface water ingress and moisture transport into concrete. Any effect on reinforcement corrosion or service life should be evaluated together with the concrete system and exposure conditions.

  • Dams and Water-Retaining Structures: May be used as part of a concrete waterproofing strategy to help reduce water seepage through treated surfaces.

  • Tunnels: Helps reduce water ingress through treated concrete surfaces and may be incorporated into the project waterproofing strategy.

  • Concrete Slabs: Designed to reduce surface water absorption and capillary water ingress in treated concrete.

PIONEER CrystalGuard 300 Dosage & Mixing Instructions

  • Surface Preparation: Clean and slightly dampen the concrete surface before application.

  • Spray Application: Apply PIONEER CrystalGuard 300 using manual or automatic spray equipment. Apply the first coat at 0.3kg per square meter and the second coat at 0.2kg per square meter.

  • Curing: Allow the surface to cure for 24-48 hours, depending on weather conditions.

  • Maintenance: Periodic inspection is recommended to ensure the continued effectiveness of the waterproofing layer.

Integral Waterproofing Admixture

PIONEER® engineers inspecting FRC construction at the construction site

Have Any Questions?
Get in Touch with Us Now!

Contact Our Sales & Technical Team

For product inquiries, quotations, technical support, or distribution opportunities,

contact our team directly.

Email

Sales & Business: Sales@pioneerfibre.com
Technical Support: Support@pioneerfibre.com

WhatsApp

Sales Manager: +1 (406) 717-9829
Technical Director: +1 (929) 569-9992

Get a Quick Quote or Product Recommendation
Tell us about your application, and our team will help you find the right product and solution.Select your application below for a faster response.

Privacy Assurance: We respect your privacy and will never share your information. 

Why Choose Us?

Proven Expertise & Greater Savings

Since 2002

FFiber Reinforcement Expertise.

Advanced Manufacturing

for Consistent Product Quality.

Global Distribution

& Supply Chain Support.

Experience Across

Diverse Construction Projects.

Why Choose PIONEER Technologies

1. Product-Specific Documentation

Request current technical data sheets and available test reports. Confirm their relevance to the selected product and project requirements.

2. Application-Based Selection

Evaluate crystalline waterproofing products based on the concrete condition, water exposure, application method, and project specifications.

3. Waterproofing Product Options

Explore admixture and surface-applied options for concrete waterproofing. Selection depends on the application and current product guidance.

4. Technical Support

Our team provides product selection, dosage guidance, and application support. Final recommendations depend on project conditions and technical review.

Aerial view of PIONEER® production facility in Nanjing, showcasing the company's modern factory and large-scale concrete fiber manufacturing capabilities.

26,500m² production base

Synthetic fibers manufacturing production line for fiber reinforced concrete, producing concrete fibers and fiber mesh reinforcement to reduce cracks and improve durability.

Advanced fiber dispersibility

Concrete fibers production line manufacturing reinforcement fiber for concrete and improving fiber reinforced concrete performance.

Exceptional tensile strength

FAQ

  • CrystalGuard 300 is a spray-applied penetrating crystalline waterproofing sealer for concrete surfaces. It is the penetrating-sealer product within the CrystalGuard Surface-Applied range.

  • CrystalGuard 300 is positioned as a penetrating treatment rather than a cement-based crystalline coating. For a coating or slurry application, evaluate CrystalGuard 400.

  • Yes. CrystalGuard 300 can be applied to existing concrete with suitable surface preparation. Contact PIONEER for substrate requirements, surface preparation instructions and application guidance.

  • The typical application rate is approximately 0.5 kg/m² in total, applied in two coats: 0.3 kg/m² for the first coat and 0.2 kg/m² for the second. Actual consumption varies with surface texture and substrate condition. Contact PIONEER for application guidance and material quantity estimates.

  • Apply CrystalGuard 300 to a properly prepared concrete surface using approved manual or automatic spray equipment. Follow the current product procedure for surface moisture, coat interval, coverage and curing.

bottom of page